Removal Of The Pulsair Filter; Removal Of The Pulsair Reed Valve; Removal Of The Spark Plug; Removal Of The Carburettor - PEUGEOT V-Clic Workshop Manual

Removal of the pulsair filter.

Removal of the pulsair reed valve.

- Removal of the storage compartment (see
procedure 1).
- Removal of the central cover panel (see
procedure 3).
- Remove the pulsair filter (1).
- Removal of the pulsair reed valve (2) (Refer
to the workshop manual: 2-valve, 50cc 4-
stroke engine P/N 759517).

Removal of the spark plug.

- Removal of the storage compartment (see
procedure 1).
- Removal of the central cover panel (see
procedure 3).
- Disconnect the suppressor (1).
- Remove the spark plug.

Removal of the carburettor.

- Removal of the storage compartment (see
procedure 1).
- Loosen the collars (1).
- Disconnect the fuel supply hose (2).
- Pull the throttle control cable (3) out of the
carburettor.
- Disconnect the electric choke (4).
24
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
2
2
4
3
2
1
1