Table of Contents
Advertisement
FR
MAINTENANCE ADVICE
Ensure that the servicing schedule for your vehicle is
strictly followed to maintain your contractual warranty
GB
rights.
A table of inspections for the maintenance schedule is
inserted into the maintenance booklet. The registered
dealer must add his stamp, the date of servicing and the
DE
number of kilometres the vehicle has covered.
In order to maintain maximum safety and reliability of
your vehicle, you are advised to have maintenance
IT
and repairs carried out by a registered dealer who
has the necessary technical training, specific tools
and spare parts.
CLEANING THE VEHICLE
ES
The bodywork is made of plastic parts that can
be painted or are shiny. Do not use solvents or
cleaning products that are too corrosive.
NL
Do not use high pressure cleaners which may
cause water to infiltrate the following parts:
seals, bearings and hinges, electrical
GR
components such as connectors, contactors
and lighting.
Wash the bodywork with soapy water and rinse with
generous amounts of clear water. The vehicle can be
SE
dried with a chamois leather.
After washing the vehicle, brake several times at low
speed to dry out the brakes.
PT
The vehicle should be washed in a place
equipped for wastewater collection.
Certain silicon-based products can alter the
quality of the paintwork.
FI
In case of need or doubt, a registered dealer can advise
you on using cleaning products or restoring scratched
bodywork.
DK
16/23
SERVICE OPERATIONS
SPARK PLUG
It is essential to use a resistive spark
suppressor and a resistive spark plug in
accordance with the manufacturer's
recommendations.
The engine must be cold.
• Remove the saddle storage compartment.
• Disconnect the suppressor.
• Remove the spark plug.
• Measure the distance between the electrodes and
correct it if necessary.
Recommended spark
plug
Electrode gap (E)
• Fit and screw in the spark plug manually.
• Tighten the spârk plug with a spanner.
• 1/8 - 1/4 turn for a reused spark plug.
• 1/2 turn for a new spark plug.
Ensure the suppressor is correctly
clipped onto the spark plug.
Have the torque quickly checked by a
registered dealer.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
E
A
NGK CR7HSA
0.7 to 0.8 mm
ENGINE OIL LEVEL
Too much oil will noticeably restrict the
vehicle's performance.
1
• Place the vehicle on its central stand on flat ground.
• Start the engine, let it run for a few minutes and then
stop it.
• Wait a few minutes for the oil to stabilise.
• Remove the cap/oil gauge (1).
• Wipe dry the filler cap/gauge and fit it back but do not
screw it into the filler hole.
• Remove the filler cap/gauge and check the oil level
• The oil level shall not be between the minimum (A) and
maximum (B) level marks without exceeding the latter.
• Add oil if necessary.
B
A
Hide quick links:
Advertisement
Table of Contents
