Service Operations; Removal Of The Spark Plug; Replacing The Air Filter - PEUGEOT Speedfight3 Workshop Manual

SERVICE OPERATIONS

SERVICE OPERATIONS

Removal of the spark plug

- Remove the storage compartment. See:
Procedure 1. page 20.
- Disconnect the suppressor (1).
- Remove the spark plug.
Essential precautions: When re-installing,
srew in the spark plug (a few turns)
by hand.
- Tighten the spark plug.
Tightening torque: 20 Nm.
• Air cooling: Spark plug NGK BR5HS.
Tightening torque: 12 Nm.
• Fluid cooling system: Spark
plug NGK CR7EKA.

Replacing the air filter

- Remove the air filter cover (5 bolts) and its
seal.
- Remove the air filter (1).
- Clean inside the air filter box.
- Lubricate the air filter with a special purpose
oil for air filters and squeeze out the excess
oil.
- Fit the air filter.
- Fit the gasket (2).
- Install the air filter cover.
26
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
1
1
2