HP StorageWorks 2000 Series Reference Manual page 30

2. Set the following options:
Page Refresh Rate
Auto-Logout Timeout Type the number of minutes that a user's session can be idle
Temperature Display
Mode
3. Click Change Preferences.
Select how often you want pages to refresh based on the
speed of your computer and Ethernet connection.
• Fast – Use for fast computers with a fast Ethernet
connection. For example, Pentium III 500 MHz or higher
with a T1 connection.
• Medium – Use for slower computers with a slower
Ethernet connection. For example, Pentium III 400 MHz
and slower with a cable modem or DSL connection.
• Slow – Use for the slowest computers with a slow Ethernet
connection. For example, Pentium II 200 MHz and slower
with a dial-up modem of 33.5-5 Kbit/sec connection. This
is the default.
before being automatically logged off. The allowed values
are 0–255 minutes, where 0 means no timeout. The default is
30 minutes.
Select Fahrenheit or Celsius for all temperature status
indications. The default is Celsius.