HP StorageWorks 2000 Series Reference Manual page 237

SNMP TRAPS
Not supported
The following SNMP traps are
supported
Maximum number of trap clients
Number of trap clients currently
enabled
This trap is generated each time
an event occurs that passes the
the
Includes the following objects per
the FA MIB2.2 Spec
IP address of a client registered
for traps
User Datagram Protocol (UDP)
port to send traps to for this host
Settable: Defines the trap severity
filter for this trap host. The
will send traps to this
host that have a severity level less
than or equal to this value.
Specifies the state of the row
N/A
1
1 if traps enabled; 0 if traps
not enabled
N/A
and
IP address set through
Telnet
162
Default: warning[6]
• READ: rowActive[3] if
traps are enabled through
Telnet; otherwise
rowInactive[2]
• WRITE: Not supported