HP StorageWorks 2000 Series Reference Manual page 277

24 Informational
25 Informational
27 Informational
28 Informational
31 Informational
32 Informational
33 Informational
34 Informational
37 Informational
The assigned LUN for this volume
has changed.
The statistics for the specified vdisk
have been reset.
Cache parameters have been changed
for the specified vdisk.
Controller parameters have been
changed. This event is logged when
general configuration changes are
made; for example, utility priority,
remote notification settings, user
interface passwords, and management
port IP values. This event is not
logged when changes are made to
vdisk or volume configuration.
A global or vdisk spare was deleted.
Vdisk verification has started.
Controller time/date has been
changed. This event is logged before
the change happens so the event
timestamp shows the "old" time.
Controller has been restored to
factory defaults.
Vdisk reconstruction has started.
For an FC controller, restart it to
make the default loop ID take
effect.