HP StorageWorks 2000 Series Reference Manual page 220

To view the event log:
1. Do one of the following:
In the System Panel, click the
In the menu, select Monitor > Status > View Event Log.
The event log page is displayed.
2. Click one of the following buttons in the Select Event Table To View panel to see
the corresponding events.
For a dual-controller system:
Controller A & B Events
Controller A & B Critical/
Warning Events
Controller A Events
Controller B Events
For a single-controller system:
All Controller Events
Controller Critical/Warning Events Shows only critical and warning events.
The page shows up to 200 events for a single controller or up to 400 events for both
controllers. The events display in reverse chronological order (the most recent first).
The following information is displayed:
Severity Level Critical, Warning, or Info (informational).
Date/Time Year, month, day, and time the event occurred.
Event Code A code that assists service personnel when diagnosing problems. For
event-code descriptions and recommended actions, see Appendix E.
Event Serial An identifier for the event. The prefix (A or B) indicates which
Number controller logged the event.
Message Information about the event.
icon.
Shows all events for both controllers. This is the default.
Shows only critical and warning events for both
controllers.
Shows events logged by controller A.
Shows events logged by controller B.
Shows all events. This is the default.