Printer With Optional Multi-Hopper - DataCard CD800 User Manual

Printer with Optional Multi-Hopper

Cover Ridges
Front Panel
Cover
Latch Button
Cover Ridges
Print Ribbon Cartridge
Multi‐Hopper Cover
Card Hoppers H1
through H6
CD800 Card Printer User's Guide
Latch Button
Cover
Print Ribbon
Cartridge
Output Hopper
Card Hoppers
H1 through H6
Open the cover to access the printhead and ribbon.
Push the latch button on top of the cover to release it and
access the printhead and ribbon.
Press down on the ridges when closing the cover to make sure
that it latches properly on both sides.
The print ribbon cartridge is accessible when the cover is
open. Use the cartridge handle to remove it from the printer.
Unlock the printer and open the multi‐hopper cover to load
card stock.
The H1 through H6 hoppers hold up to 100 cards each.
Multi‐Hopper
Cover
7