149: Option Not Installed; 150: Print While Unlocked; 151: Failed To Lock; 152: Insert New Card Side 2 Up - DataCard CD800 User Manual

149: Option not installed

The printer does not support the personalization being requested for the card. The card will be
canceled.
Change the card data to match the printer's options and settings, or print to a printer that is
configured to support the personalization being requested.
Press the User button on the printer, or click OK on the PC to clear the message.
H & T
INTS IPS
In the card format, don't include references to hardware that cannot be accessed by the system.
For more information, refer to your ID software documentation or ask your system administrator.

150: Print while unlocked

The printer is unlocked. The card will be canceled.
Make sure that all access doors are closed securely and locked.
Click OK on the PC to clear the message.

151: Failed to lock

An attempt to lock the printer failed. The card will be canceled.
1.
Make sure that all access doors are closed securely.
2.
Try locking the printer again.
Click OK on the PC to clear the message.
H & T
INTS IPS
Make sure that the reject tray is installed properly before locking the printer.

152: Insert new card side 2 up

1.
Turn a new card over end to end so side 2 is facing up.
2.
Insert the card in the printer.
3.
If the card is not immediately picked, press the printer's U
Click Cancel on the PC if you want to cancel the card.
CD800 Card Printer User's Guide
button or click OK.
SER
73