DataCard CD800 User Manual page 29

The menu system has four major branches:
Use the Maintenance menu to run a cleaning card, print a test card, or reset the locks on a

system with locks.
Use the Status menu to see settings and data about the printer.

Use the Configuration menu to change settings.

Use the Activate menu to enable or disable secure features of the printer.

Use the Activate menu only during installation or removal of systems that
require activation.
H & T
INTS IPS
You can access the menu system when Ready displays on line 1 of the LCD panel.

The printer returns to the Ready status after 2 minutes of no activity. Changes not applied are

lost.
To leave a selection without changing the value, press the up or down arrow key until Exit

displays, and then press E
CD800 Card Printer User's Guide
.
NTER
15