3.
Remove the protective paper from both sides of the double‐sided, sticky laminator cleaning
card and insert the card under the rollers of the card exit slot of the laminator. When it is in
the correct location and pushed in far enough, the card stays in place.
4.
Use the LCD menu system to start the cleaning cycle.
a.
Begin when the printer displays Ready and the U
shows steady green. Press the U
Suspended displays on line 1 of the LCD panel.
b.
Press E
c.
Maintenance displays on line 2 of the LCD panel. Press E
to enter the Maintenance menu.
d.
Cleaning Card displays on line 2 of the LCD panel. Press
E
to enter the Cleaning Card menu.
NTER
e.
Printer displays on line 2 of the LCD panel. Press the down
arrow.
A-14
to enter the menu system.
NTER
button
SER
button.
SER
NTER
CLM Laminator