Clipping Movies - Ricoh GR II Operating Manual

Clipping Movies

The unnecessary parts at the beginning or end of a movie can be deleted,
and the movie can be saved as a new file.
1
Display the movie to be edited in playback mode, and then
press the MENU/OK button.
The [Playback] menu appears.
1
2
Select [Clip Movie File], and then press the $ button.
The [Clip Movie File] screen appears.
3
Press the ADJ. lever to select either
the beginning or the end of the
movie.
The point highlighted in yellow indicates
which has been selected.
If the Fn2 button is pressed while this screen
is shown, an explanation of the operations
appears. If the Fn2 button is pressed again,
the previous screen reappears.
4
Press the #$ buttons or the ADJ. lever left or right to move the
point to be deleted.
The yellow point moves. You can specify the point in increments of 1 second.
5
Press the MENU/OK button.
A new movie file is saved with the unnecessary parts deleted.
94