Shooting Continuously; Continuous Shooting - Ricoh GR II Operating Manual

Shooting Continuously

Set [Continuous Mode] of the [Shooting] menu to [Continuous] to perform

continuous shooting.

Pictures continue to be taken for as long as you hold down the shutter re-
lease button. The autofocus is fixed in the first frame.
When [Continuous] is set, the symbol appears
1
on the shooting screen.
Set [Continuous Mode] to [Off ] to return to nor-
mal shooting.
Caution -------------------------------------------------------------------------------------------------------
• The flash cannot be used with this function.
• The self-timer cannot be used with this function.
• If the [Effect] of the [Shooting] menu is set to [Hi-Contrast B&W], [Miniaturize], [Clarity], or [Bril-
liance], continuous shooting is not available.
• If the [Picture Format] of the [Shooting] menu is set to o or p, the continuous shooting stops
when the camera memory capacity for processing reaches full.
Note -----------------------------------------------------------------------------------------------------------
• Continuous shooting can also be performed by holding the AF button down while fully pressing the
shutter release button (Continuous AF). See "When the AF Function Switching Lever is Set to C-AF"
(p.62) of "Using the AF Button".
• The maximum number of pictures that can be taken continuously for one press of the shutter release
button is 999.
• In the [Key Custom Options] menu, [Cont. Mode] can be registered to use to the ADJ. lever and the
Fn1, Fn2, and Effect buttons. (p.120, p.122)
72