Basic Shooting; Shooting With Auto Settings - Ricoh GR II Operating Manual

Basic Shooting

Now you are ready.

Shooting with Auto Settings

1
Turn the mode dial to 5.
Turn the mode dial while pressing the mode
dial lock release button.
2
To use the flash, slide the FOPEN
switch down.
The flash opens.
The autofocus/flash lamp blinks while the
flash charges. Once the flash is charged, the
lamp turns off and the camera is ready to
shoot.
The flash will not fire when the flash cover is closed.
3
Press the shutter release button
halfway.
Focus is adjusted, and exposure is set.
The distance is measured from up to nine
points and the green focus frame appears for
the area in focus.
4
Press the shutter release button fully.
The image you have just taken is displayed on the picture display and saved.
32