Correcting The White Balance - Ricoh GR II Operating Manual

Correcting the White Balance

You can correct the color tones of still images.
1
Display the image to correct in playback mode, and then press
the MENU/OK button.
The [Playback] menu appears.
2
Select [White Balance Compensation], and then press the $
button.
The [White Balance Compensation] screen appears.
2 3
Press the !"#$ buttons to make
point adjustments.
To reset the white balance, press the r but-
ton. If the r button is pressed again, the
compensation is canceled.
If the Fn2 button is pressed while this screen
is shown, an explanation of the operations
appears. If the Fn2 button is pressed again,
the previous screen reappears.
4
Press the MENU/OK button.
A message appears to indicate processing is being performed, and then the
corrected image is saved as a new image.
106