Setting The Color Temperature; Setting The White Balance Manually - Ricoh GR II Operating Manual

Setting the Color Temperature

1
Select [CT] in Step 2 on p.68, and then press the Fn2 button.
The [White Balance Detailed Settings [CT]] screen appears.
2
Press the !" buttons to set a value.
Values from 2500 K to 10000 K can be set.
1
If the Fn2 button is pressed, the white balance
compensation can be performed. If the Fn2
button is pressed again, the screen returns to
the color temperature settings.
3
Press the MENU/OK button.
The [White Balance] screen reappears.
4
Press the MENU/OK button.
The shooting screen reappears.

Setting the White Balance Manually

1
Select [Manual] in Step 2 on p.68.
2
Aim the camera at a white subject, such as a sheet of paper,
under the light for shooting.
3
Press the Fn2 button.
The white balance is measured.
If the Fn2 button is pressed while the flash is being fired, the white balance
for flash shooting can be measured.
4
Press the MENU/OK button.
The shooting screen reappears.
70