Flash Mode - Ricoh GR II Operating Manual

2
Press the F ($) button.
The flash mode setting screen appears.
3
1
Press the #$ buttons to change the

flash mode.

The symbol appears on the shooting screen.
Note -----------------------------------------------------------------------------------------------------------
• If the ISO sensitivity is set to [Auto], the range the flash light will reach is approximately 20 cm to
3.0 m from the front edge of the lens.
• The flash fires a pre-flash to increase the AE accuracy. The pre-flash does not fire when set to [Manual
Flash].
• The flash intensity can be adjusted in [Flash Exposure Compensation] of the [Shooting] menu.
(p.81)
• For the external flash, see p.167.
Caution -------------------------------------------------------------------------------------------------------
• The flash mode cannot be changed when the flash cover is closed.
• The flash does not fire in the following cases.
• In Continuous Mode
• During Auto Bracket
• During Interval Composite
• In 3 mode
• Do not open the flash if using an external flash, conversion lens, or hood.
80