Getting Ready - Ricoh GR II Operating Manual

Getting Ready

Prepare the camera for use.
Inserting the Battery and a Memory Card
Be sure that the camera is off before inserting or removing the battery and
memory card.
SD memory cards, SDHC memory cards, and SDXC memory cards can be
used with this camera. "Memory card" refers to these memory cards in this
manual.
1
Slide the release lever on the bottom of the
camera toward OPEN to open the battery/
card cover.
2
Make sure that the memory card is facing
the right way and then push the card all
the way in until it clicks.
To remove it, press in the memory card and then re-
lease your hand.
3
Insert the battery.
Use the battery to press the latch and insert the bat-
tery all the way into the battery compartment.
To remove the battery, press and slide the latch.
4
Close the battery/card cover and slide the
release lever in the opposite direction of
OPEN to lock it in place.
1
2
1
2
23