Developing RAW Images
You can convert RAW images into JPEG format and then save them as new
files. The white balance and effect can be configured before saving the files.
1
Display a RAW image in playback mode, and then press the
MENU/OK button.
The [Playback] menu appears.
2
Select [RAW Development], and then press the $ button.
The [RAW Development] screen appears.
2
3
Press the !" buttons to select a
parameter, and then press the $
button.
The following settings are available.
• Picture Size
• White Balance
• Brightness Compensation
• Effect
• Image Settings
• Dynamic Range Compensation
The settings that were set at the time of shooting are initially selected.
4
Press the !" buttons to select a setting, and then press the #
button.
With [White Balance], you can perform white balance compensation by
pressing the $ button.
With [Effect] and [Image Settings], you can set the detailed settings by press-
ing the $ button.
5
When you have finished configuring all of the settings, press the
MENU/OK button.
A new JPEG image is saved.
108
• Color Moire Correction
• Aspect Ratio
• Noise Reduction
• Color Space Setting
• Ambient Brightness