Shooting Continuously With Different Settings (Auto Bracket) - Ricoh GR II Operating Manual

Shooting Continuously with Different Settings (Auto
Bracket)
In the [Auto Bracket] settings in the [Shooting] menu, three images will be
taken with differing values for exposure, white balance, etc.
AE-BKT 1/3EV
AE-BKT 1/2EV
WB-BKT
WB-BKT Preset
Effect-BKT
DR-BKT
CONTRAST-BKT
Caution -------------------------------------------------------------------------------------------------------
• The flash cannot be used with this function.
• [AE-BKT 1/2EV] cannot be selected in Tv mode.
• When [Effect] of the [Shooting] menu is set to [Miniaturize], [Clarity], or [Brilliance], [AE-BKT 1/3EV],
[AE-BKT 1/2EV], and [DR-BKT] cannot be used.
• [Shift Crop] cannot be selected for [Effect-BKT].
Note -----------------------------------------------------------------------------------------------------------
• In the [Key Custom Options] menu, [Auto Bracket] can be registered to use to the ADJ. lever and the
Fn1, Fn2, and Effect buttons. (p.120, p.122)
Takes images at different exposures in 1/3-EV or 1/2-EV steps from -2.0 EV to
+2.0 EV.
Takes three images (an image with more reddish than the current white balance,
an image at the current white balance, and an image with more bluish than the
current white balance).
Takes three images with different white balance settings. The white balance for the
second and third images is selected, respectively.
Takes three images with different effect settings. The effect for the second and
third images is selected, respectively.
Takes images with the dynamic range compensation set to [Off], [Weak], and
[Strong].
Takes images with different contrast settings.
1
73