Adjusting The Intensity Of The Flash - Ricoh GR II Operating Manual

Adjusting the Intensity of the Flash

The intensity of the flash can be adjusted.
1
In the [Shooting] menu, select [Flash Exposure Compensation],
and then press the $ button.
The [Flash Exposure Compensation] screen appears.
2
Press the X/Y button to set a value.
The intensity can be set in the range from
–2.0 EV to +2.0 EV in increments of 1/3 EV.
3
Press the MENU/OK button.
The set value appears on the shooting screen.
Note -----------------------------------------------------------------------------------------------------------
• When the flash mode is set to [Manual Flash], the value set for [Flash Exposure Compensation] is
invalid.
• In the [Key Custom Options] menu, [Flash Comp.] can be registered to use to the ADJ. lever and the
Fn1, Fn2, and Effect buttons. (p.120, p.122)
1
81