Program Diagram - Ricoh GR II Operating Manual

Note -----------------------------------------------------------------------------------------------------------
• The functions for the up-down dial and ADJ. lever when in TAv and M modes can be switched in [M/
TAv Mode Dial Setting] of the [Key Custom Options] menu.
• You can set whether to automatically adjust the exposure when the correct exposure cannot be ob-
tained for the aperture value and shutter speed set in Av, Tv, and TAv modes in the [Shooting] menu.
Mode
Av
1
Tv
TAv
Caution -------------------------------------------------------------------------------------------------------
• When a slow shutter speed has been set, images are not displayed on the picture display during
shooting.
• When the picture display is set to off, the aperture value and shutter speed cannot be changed. If
[Information Display Mode] of the [Setup] menu is set to [On], these values can be changed.

Program Diagram ------------------------------------------------------------------------------------------

• You can select the program diagram for P and M modes in [P Mode Selection] of the [Shooting] menu.
Diagrams 1 and 2 show the program diagram for each setting.
• The program diagram is the guide for possible shift in a particular aperture value and shutter speed
combination and changes depending on the exposure value. (The example shows when the ISO sen-
sitivity is [ISO 100].)
• When [One Press M Mode] of the [Key Custom Options] menu is set to [Program], the aperture value
and shutter speed are adjusted according to the program settings.
44
[Shooting] menu
Auto Aperture Shift
Shutter Speed Auto Shift
Shutter/Aperture Auto Shift
Setting
Off, On
Off, On
Off, Aprtr Priority, Shttr Priority