Shooting Mode; Information Display - Ricoh GR II Operating Manual

Changing the Screen Display

Shooting Mode

Select from the following displays in shooting mode.

Information display

Level indicator
Information display
Note -----------------------------------------------------------------------------------------------------------
• You can specify the information displayed each time the DISP. button is pressed in [DISP. Button Dis-
play Setting] of the [Setup] menu. (p.125)
• When [Information Display Mode] of the [Setup] menu is set to [On], information is displayed on the
picture display in the following cases even when the picture display is turned off. After the informa-
tion is displayed and no operations are performed for several seconds, or when the shutter release
button is pressed halfway, the information display disappears.
• When the Fn1 button, N button, t button, or Effect button is pressed
• When the mode dial or up-down dial is turned
• When the ADJ. lever is pressed left or right
• When the FOPEN switch is pressed to raise the flash, or the flash cover is closed
Grid guide
Histogram
Graphic display
21