15
¡ ¢ £
------------
------------
Cylinder Head, Valve Gear
Removing cylinder head
l Engine installed
Requirements
l Engine cold
Special tools, testers and aids required
♦ Connecting rod support MP 1-225
♦ Locking pin from supporting device MP
9-201
♦ Tensioning bolt T 10092
♦ Wrench for cylinder head bolts (e.g. 3452)
Procedure
-
Remove cylinder head cover ⇒ page 15-2.
-
Drain coolant ⇒ page 19-3.
-
Detach coolant hoses from cylinder head.
-
Unbolt bracket for coolant pipe at connec-
tion fitting of cylinder head.
K -
Unplug connector from coolant temperature
sender (G2/G62) -arrow-.
-
Unbolt catalytic converter from front silencer
and push to the rear.
-
Remove ribbed V-belt and tensioning device
⇒ page 13-1.
OCTAVIA
Edition 02.02
S00.5104.55.20