Inspecting Axial Play Of Camshafts - Skoda Octavia Workshop Manual

OCTAVIA
Edition 10.99
S00.5104.53.20
Cylinder Head, Valve Gear
K Fig. 1
- Use a small screwdriver to carefully apply a
thin film of sealants ”D 454 300 A2” to the
two edges at the sealing surfaces of double
bearing cap/cylinder head -arrows-.
K Fig. 2
- Use a small screwdriver to carefully apply a
thin film of sealants ”D 454 300 A2” to the
two edges at the sealing surfaces of
camshaft adjuster/cylinder head -arrows-.

Inspecting axial play of camshafts

Perform measurement with bucket tappets
removed and bearing cap at the chain sprocket
side installed and the double bearing cap at the
camshaft side installed.
Special tools, testers and aids required
♦ Universal dial gauge holder MP 3-447
♦ Dial gauge
Inspection procedure
- Attach universal dial gauge holder MP 3-447
and dial gauge to cylinder head:
K Inlet camshaft
Sealing connections of double
bearing cap/cylinder head
Sealing connections of camshaft
adjuster/cylinder head
15
------------ 15-15 ------------