Removing And Installing Engine - Skoda Octavia Workshop Manual

OCTAVIA
Edition 11.96
S00.5104.51.20

Removing and Installing Engine

K The two rear jacking points are located at the
rear of both side members at the level of the
marking on the sill.
K - Remove noise insulation panel -arrow-.
- Open cap of coolant expansion tank.
- Place drip tray (e.g. V.A.G 1306) below the
engine.
K - Turn drain plug -arrow- at the radiator to the
left; fit auxiliary hose onto connection if ne-
cessary.
10
------------ 10-3 ------------