Disassembling And Assembling Oil Filter Holder - Skoda Octavia Workshop Manual

17

Disassembling and assembling oil filter holder

1 - 10 Nm
2 - Bracket
3 - Line guide
♦ Clipped into bracket item 2
4 - Connecting pipe
♦ Between oil filter holder and connect-
ion hose to intake hose
5 - Retaining clamp
♦ Ensure tightly fitted
6 - O-ring
♦ Replace if damaged
¡ ¢ £
7 - 15 Nm
♦ Cut open seal if leaking, and replace
------------ ------------
Lubrication System
8 - Seal
♦ Replace
9 - 25 Nm
10 - 0.14 MPa oil pressure switch (F1),
25 Nm
♦ Black insulation
♦ Cable: green/black
♦ Testing ⇒ page 17-8
♦ Cut open seal if leaking, and replace
11 - 15 Nm + torque a further 90° (¼ turn)
♦ Replace
12 - Oil cooler
♦ Coat contact surfaces outside of seal
with AMV 188 100 02
♦ Ensure clearance to surrounding
components
♦ Connection diagram for coolant hoses
⇒ page 19-1
13 - 25 Nm
14 - Oil filter
♦ Use tensioning strap for slackening
♦ Tighten to 20 Nm
♦ Tighten by hand
♦ Pay attention to installation notes on
oil filter
♦ Pay attention to change intervals
15 - O-ring
♦ Replace
♦ Oil before installing
16 - 40 Nm
17 - Pressure relief valve
♦ Opens at:
0.35 ... 0.45 MPa
♦ Testing oil pressure and oil pressure
switch ⇒ page 17-8
18 - Gasket with splash guard
♦ Replace
♦ Pay attention to installation position
19 - Oil filter holder
OCTAVIA
Edition 10.99
S00.5104.53.20