R Class System Memory Upgrade; Overview Of Memory Installation - HP D Series Upgrade Manual

R Class System Memory Upgrade

Overview of Memory Installation

The memory installation procedures are organized as follows:
A. Check existing system memory.
B. Turn off power to the system.
C. Remove the top sheet metal covers.
D. Remove the EMI cover.
E. Remove the memory SIMM retainer.
F. Remove the Processor/Memory card.
G. Plan the memory configuration.
H. Install memory modules.
I. Replace the Processor/Memory card.
J. Replace the memory SIMM retainer
K. Replace the EMI cover.
L. Replace the top sheet metal covers.
After completing all installation procedures, proceed to the Memory Upgrade
Verification procedure (located after the installation procedures) for instructions on
how to verify correct installation. If the memory verification is not successful, refer
to the section titled Troubleshooting Memory Configuration Error Symptoms at
the end of this manual.
2-1