Advanced Entry Calibration - Datamax Iclass Operator's Manual

5.2.2 Advanced Entry Calibration

Advanced Entry is the alternate calibration method for special-case media types. In the
procedure, sensor readings for the label and TOF values are taken using different sampling
algorithms. From this compiled list of values the best algorithm is selected and then used to
generate new readings for manual entry into memory.
Note: Use this method only when Standard Calibration has proven unsuccessful.
With the correct SENSOR TYPE selected (see Section 4.2.2), perform an Advanced Entry
Calibration as follows:
Step Action
1 Turn ON the printer.
Press the
2
then raise the printhead
assembly.
Press the
3
Press the
4
scroll to SENSOR
CALIBRATION.
Press the
5
then the
Press the
6
then the
I-Class
Displayed Message
UNCALIBRATED
Key, and
MEDIA SETTINGS
MEDIA SETTINGS
Key.
Key then
MEDIA SETTINGS
SENSOR CALIBRATION
Key, and SENSOR CALIBRATION
ADVANCED ENTRY
Key.
Key, and ADVANCED ENTRY
SENSOR GAIN
Key.
Wait briefly, about six
seconds, for the printer
to initialize.
MENU MODE
You are in MENU MODE.
You are in MEDIA
MEDIA TYPE SETTINGS.
Press the
cancel this procedure.
Press the
cancel this procedure.
You are beginning the
procedure.
Comment
Key to
Key to
65