System Settings - Datamax Iclass Operator's Manual

Printer Options (continued)
Menu Item
BACKUP LABEL
DISABLED
ACTIVE LOW
ACTIVE HIGH
ERR ON PAUSE (APP2)
ENABLED
DISABLED

4.2.5 System Settings

The System Settings menu contains operating, control, and formatting functions:
Menu Item
CONFIGURATION FILE
RESTORE AS CURRENT
SAVE SETTING AS
DELETE FILE
FACTORY SETTING FILE
NONE
36
Positions a presented label for printing (provided the
PRESENT DISTANCE setting is greater than zero),
where:
Disables backup positioning.
Positions the label when a logic low is received.
Positions the label when a logic high is received.
Sets the output when a service required fault occurs,
where:
Enables the output signal.
Disables the output signal.
Controls the creation, storage, and recall of printer
configuration files (see Appendix D), where:
Lists the files available, and then after selection
reconfigures the printer according to that file.
Saves the effective configuration of the printer to a
named file of up to nineteen characters.
Lists the files available, and then after selection,
removes that file from memory.
Note: A currently activated file cannot be deleted.
Lists the files available and then after selection that file
will be restored whenever a Level One reset is
performed; see Section 5.3.2.
Is the currently selected file.
Details
Details
I-Class