The System Menu; Entrance And Exit Prompts - Datamax Iclass Operator's Manual

4.2 The System Menu

The MENU Key accesses seven system branches:
MEDIA SETTINGS
•
PRINT CONTROL
•
PRINTER OPTIONS
•
SYSTEM SETTINGS
•
COMMUNICATIONS
•
DIAGNOSTICS
•
MCL OPTIONS
•
Notes: (1) Entering the menu takes the printer offline and halts the processing of new
data.
(2) Selected Menu items are indicated with an asterisk (*) next to the displayed
setting, while items designated with a section symbol (§) require a reset to
become effective.
(3) Password protection can prevent accidental or unauthorized Menu System
changes; see Section 4.2.5.
(4) The commands from your host computer may, in some cases, override the
menu settings; see Section 4.2.6 for setting controls.
(5) Depending upon the installed firmware, some of the menu selections
represented below may not appear in your printer.
(6) Options or items not detected by the printer may indicate NOT INSTALLED
when accessed in the menu.

4.2.1 Entrance and Exit Prompts

Depending upon the security setting and printer configuration, the following Entrance and
Exit Prompts may appear when accessing or exiting the menu (see Section 5.1.1 for other
prompts).
Press the Key to enter Menu Mode.
•
22
READY STOP ERROR
NFOV!NPEF
NFEJB!TFUUJOHT
REV FWD
ENT
ESC
I-Class