Communications - Datamax Iclass Operator's Manual

System Settings (continued)
Menu Item
VOID DISTANCE
0.50in (10 – 2.00)
RETRY COUNT
1 (0 - 3)
BACKFEED ON CLEAR
DISABLED
ENABLED
SCL FONT BOLD FACTOR
01 (1 – 36)

4.2.6 Communications

The Communications menu contains interface port and host control functions:
Menu Item
SERIAL PORT A ♦
BAUD RATE
44
Sets the distance to print VOID on a faulted label,
where:
Is the distance, measured from the trailing edge, which
establishes the text size.
Note: VOID will not be printed if insufficient text
space exists or if the fault occurred after
printing completed. Also, the text can be
customized; see the Class Series 2
Programmer's Manual.
Sets the number of printing attempts before declaring a
fault, where:
Is the count.
Note: Greater than 1 (one) counts are valid only
when Linear Scanner or RFID equipped.
Determines positioning after a fault is cleared, where:
No label positioning occurs, as the location is assumed
correct.
Note: If reloading, the user must place media at the
SOP position.
Automatically positions the label.
Sets a scalable font boldfacing amount, where:
Is the setting, based on an incrementing scale where
one (01) is minimum.
Controls the RS-232 communications settings for Serial
Port A, where:
Sets the serial communication rate, where:
Details
Details
I-Class