System Maintenance Screen - Datamax Allegro 2 Operator's Manual

3.5

System Maintenance Screen

The third screen, System Maintenance, is used to format and copy
memory modules, print test labels, and perform several other
maintenance functions.
To access the screen in the label name position of the Create/Modify
Label or Print Label Screens, use ALT-S. The screen will look like
this:
1) TEST AND FORMAT MODULE.
2) COPY MODULE.
3) METRIC ? NO.
4) PRINT TEST LABEL.
5) SYSTEM TEST LABEL.
6) EDIT MODULE NAME.
7) RESET PRINTER.
8) EXIT TO RS-232 SYSTEM.
9) PACK MODULE DATA.
Figure 3-6 System Maintenance Menu
To exit the screen, press the Esc key. All System Maintenance
Screen choices are explained below:
Test and Format Module:
This test destroys all existing memory module data!
Follow the prompts to perform the test.
Warning
Allegro2
Creating Labels Using Internal Batch Software
SYSTEM MAINTENANCE
ENTER NUMBER: ________
Used to format or reformat the memory
of a Flash Module. Tests the memory
module to see that it properly functions,
and that it is capable of erasing and
loading data.
55