Download Print this page

GE PRO AIR 107 Service Manual page 85

Split system air conditioner
Hide thumbs Also See for PRO AIR 107:

Advertisement

Maintenance
10
Turn power off and pull out the power plug before cleaning air
conditioner. Or it may cause the electric shock.
Never dampen the air conditioner, which may cause electric
shock. Never rinse the unit with water.
Volatile liquid like thinner or gasoline would damage the
appearance of air conditioner (Only adopt soft dry cloth and
wet cloth with neutral scour when cleaning air conditioner
appearance)
Cleaning the front panel
Take off the front panel
Pull the front panel in the direction as shown by arrow with
force to remove the front panel.
Clean the front panel
Use a brush, water and neutral detergent to clean and then
dry it in the shadow.
Install the panel
Pull the front panel in the direction as shown by arrow and
take care to catch the latch.
Cleaning the air filter
Remove the air filter
Remove the front panel as shown above. Push away the latch at
the filter net with hand and take out the filter net as shown in the
diagram at the right.
Clean the air filters
Use vacuum cleaner or water rinsing to clean the filter. If the air filter is
very dirty (such as oil stain), use warm water (below 45
detergent dissolved to clean the air filter, and place it in a shady and
cool place for natural drying, as shown in the diagram at the right.
Install the air filters
Install the air filter properly according to the arrow direction. Let its
side that marked with "Front" face you. Then cover and clasp the
panel well.
Remarks:
Don't dry the panel or air filter directly under sun burn; don't
wash them by hot water which is hotter than 45
fire (For these would cause fade, fire or deformation)
Warning
) with neutral
or burn it on
—84—

Advertisement

loading