Advertisement
Operation procedures/pictures
Disassembling panel body
Open the three taping screws fixing the panel
body with a screw driver. Pull upward the
panel body and then lift it backward to take out
the panel body.
As shown in Fig.8-4
Disassemble electric box cover
Press down the latches around the cover of
electric box to remove the cover of electric
box as shown in Fig.8-5.
Disassembling water-tray
Pull away the terminals of guide louver motor
and divide the lower right latch of the water
tray with a screw driver. Rotate the water tray
to disengage it from the side latch. Remove
the water tray as shown in Fig.8-5
Screw
Clamp
Water-tray
terminal
—41—
Panel body Screw Cover
Clamp
Connecting
Fig.8-4
Fig.8-5
Fig.8-6
Advertisement
