Advertisement
8.4
Disassembling procedures for outdoor unit
Suitable for PRO AIR I109 IN / PRO AIR I109 OUT, PRO AIR I112 IN / PRO AIR I112 OUT
Operation procedures/pictures
Disassemble the top cover
Screw off the one piece of fixing screw that fixes
the handle with screwdriver and push down with
strength to take out the handle.
Screw off the 3 pieces of screws around the top
cover and then lift it upward to take out the top
cover as shown in Fig.8-36.
Disassembling net cover
Screw off 4 taping screws at the rear sideboard
and valve support chassis and condensor
sideboard to remove the net cover as shown in
Fig.8-37.
Disassembling panel assembly
Screw off the 5 pieces of tapping screws at the
valve support chassis and sideboard of the
condenser to take off panel assembly as shown
in Fig.8-38.
Top cover Screw
Rear grill
Screw
Panel
Screw
—53—
Screw Handle
Fig.8-36
Fig.8-37
Fig.8-38
Advertisement
