Advertisement
Operation procedures/pictures
Disassembling the cabinet assembly
Screw off the 8 tapping screws on the cabinet,
chassis and condenser sideboard to take off
the cabinet assembly as shown in Fig. 8-52.
Disassembling the electric box
Screw off the 2 screws that fix the electric
installation board and unplug the lead wire
insert of compressor, fan motor and four-way
valve (not for cooling only) to take off the
electric box as shown in Fig. 8-53.
Disassembling rear sideboard
Screw off the screws on the rear sideboard,
valve support and chassis assembly and lift it
upward to take off the rear sideboard as
shown in Fig. 8-54.
Screw
outer cover
Screw
Electric box
Rear sideboard
—59—
Fig. 8-52.
Fig. 8-53
Electric box
Fig. 8-54
Advertisement
