Advertisement
7.3
Names and functions of each part of the remote controller
Note:
Be sure that there are no obstructions
Swing button
The guide louver will swing
at a certain angle each time
the swing button is pressed
and
will
stop
operation
when the button is pressed
again.
TEMP. button
Press
once and it rises by
1 degree. Press
once and
it drops by 1 degree.
In
mode,
room temp. can be adjusted
in the range of 16℃-30 ℃
MODE button
Press this button in turns to
change
the
operational
mode in the below order.
Auto
—37—
Swing button
Press the button once,
and the air speed changes
in the order of
AUTO fan speed
Remarks: At
mode,
the wind speed of fan is
not adjustable.
COOL mode operation
Dry mode
Ventilation mode
HEAT mode operation
ON/OFF button:
Press this button, the unit
will start to run, when
repressed it, it will stop
running.
Advertisement
