Advertisement
Operation procedures/pictures
Disassembling the cabinet assembly
Screw off the 8 tapping screws on the cabinet,
chassis and condenser sideboard to take off
the cabinet assembly as shown in Fig. 8-75.
Disassembling the electric box
Screw off the screws fixing the electric device
installation board, and pull out the inserting
contacts for leads of compressor and fan
motor,
and
remove
installation board as shown in Fig. 8-76.
Disassembling rear sideboard
Screw off the screws (14 pieces) that fix the
rear sideboard, valve support and chassis
assembly and lift it upward to take off the rear
sideboard as shown in Fig. 8-77, 8-78.
the
electric
device
—67—
Cabinet assembly
Rear
sideboard
Screw
Fig. 8-20
Fig. 8-75
Screw
Fig. 8-76
Frame for
electromagnetic valve
Fig. 8-21
Advertisement
