The Ipsec Monitor Screen - ZyXEL Communications ZyWALL 1100 User Manual

6.14 The IPSec Monitor Screen

You can use the IPSec Monitor screen to display and to manage active IPSec To access this
screen, click Monitor > VPN Monitor > IPSec. The following screen appears. SAs. Click a
column's heading cell to sort the table entries by that column's criteria. Click the heading cell again
to reverse the sort order.
Figure 105 Monitor > VPN Monitor > IPSec
Each field is described in the following table.
Table 53 Monitor > VPN Monitor > IPSec
LABEL
Name
Policy
Search
Disconnect
#
Name
Policy
IKE Name
Cookies
My Address
Secure Gateway
Up Time
Timeout
Inbound (Bytes)
Outbound (Bytes)
Chapter 6 Monitor
DESCRIPTION
Type the name of a IPSec SA here and click Search to find it (if it is associated).
You can use a keyword or regular expression. Use up to 30 alphanumeric and
_+-.()!$*^:?|{}[]<>/ characters. See
details.
Type the IP address(es) or names of the local and remote policies for an IPSec SA
and click Search to find it. You can use a keyword or regular expression. Use up
to 30 alphanumeric and _+-.()!$*^:?|{}[]<>/ characters. See
on page 124 for more details.
Click this button to search for an IPSec SA that matches the information you
specified above.
Select an IPSec SA and click this button to disconnect it.
This field is a sequential value, and it is not associated with a specific SA.
This field displays the name of the IPSec SA.
This field displays the content of the local and remote policies for this IPSec SA.
The IP addresses, not the address objects, are displayed.
This field displays the Internet Key Exchange (IKE) name.
This field displays the cookies information that initiates the IKE.
This field displays the IP address of local computer.
This field displays the secure gateway information.
This field displays how many seconds the IPSec SA has been active. This field
displays N/A if the IPSec SA uses manual keys.
This field displays how many seconds remain in the SA life time, before the
ZyWALL/USG automatically disconnects the IPSec SA. This field displays N/A if
the IPSec SA uses manual keys.
This field displays the amount of traffic that has gone through the IPSec SA from
the remote IPSec router to the ZyWALL/USG since the IPSec SA was established.
This field displays the amount of traffic that has gone through the IPSec SA from
the ZyWALL/USG to the remote IPSec router since the IPSec SA was established.
ZyWALL/USG Series User's Guide
123
Section 6.14.1 on page 124
Section 6.14.1
for more