Navigation Data Boxes - Furuno GP-1670 Operator's Manual

1. OPERATIONAL OVERVIEW
1.7

Navigation Data Boxes

The navigation data boxes, displayed at the bottom of the screen, show various navi-
gation data fed from the sensors connected to your system. Two or four boxes can be
displayed and you can freely change the data shown in each box. The data that you
can show depends on your system configuration. The boxes can be shown or hidden
with the [Nav Data] soft control.
Note: Waypoint name, distance to WPT, bearing to WPT, XTE, TTG and ETA are not
available unless you are navigating to a point or route. Bars (--) are shown in the re-
spective box when the data is not available.
1.7.1 How to select the data to display in a box
1. Open the full RotoKey menu then choose [Select Data]. The background color of
all but one of the boxes is grey.
Box not greyed out is
currently selected box.
2. Rotate the RotoKey
the [Select Data] (data category) window.
3. Select a data box category. A list of data relevant to the category selected ap-
pears.
POS
WPT
DIST
BRNG
XTE
TTG
ETA
Date
Time
DIST-E
Navigation
4. Select the data desired.
1-10
kn
kn
TM
to select the data box to change then push the key to show
SOG
COG
STW
HDG
ODD
TRIP
RUDDR
ROT
Speed/
Depth
Bearing
Environment Wind