System Menu - Furuno GP-1670 Operator's Manual

Gps plotter
Hide thumbs Also See for GP-1670:
Table of Contents

Advertisement

10.3

SYSTEM Menu

[LANGUAGE]: Select the language to use, among English and major European and
Asian languages.
[UNITS OF MEASURE]: The default units of measure are based on the language se-
lected. However, you can freely set the units of measure for distance, speed, wind
speed, depth, temperature, air pressure, oil pressure and fuel.
Item
Distance
Speed
Wind Speed
Depth
Temperature
Air Pressure
Oil Pressure
Fuel
[FIX]: Provides for adjustment of the GPS position.
FIX DATUM
[POSITION FILTER]: When the DOP or receiving condition is unfavorable, the GPS
fix may change, even if the vessel is dead in water. This change can be reduced by
smoothing the raw GPS fixes. You can choose the setting from among [Off], [Low],
[Medium] and [High]. The higher the setting, the more smoothed the raw data, howev-
er too high a setting slows response time to change in latitude and longitude. This is
especially noticeable at high ship's speeds. [Off] is the "normal" setting; increase the
setting if the GPS fix changes greatly.
[SPEED FILTER]: During position fixing, ship's velocity (speed) is directly measured
Available units
NM, SM, KM, NM+FT, NM+MT, SM+FT
kn, mph, km/h
kn, m/s, mph, BFT
m, ft, fm, pb, HR
°C, °F
Bar, hPa
Bar, PSI, kPa
l, g
10. CUSTOMIZING YOUR UNIT
WGS 1984
10-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gp-1870

Table of Contents