Table of Contents
Advertisement
This section covers navigation. You can navi-
gate by waypoint, cursor-selected point and
route.
6.1 Navigation
Navigating to a waypoint
1. Press the [MENU] key.
2. Press the [1] key twice to select Video
Plot.
3. Press the [6] key twice to select Destina-
tion Set.
Figure 6-1 Destination set menu
4. Press the [3] key to select WPT.
5. Press the [ENTER/SELECT] key.
6. NAVIGATION
Figure 6-2 Screen for entry
of destination waypoints
6. Use the trackball to select waypoints.
(Waypoints may also be entered with the
numeric keys, in which case omit step 7.
If an unregistered waypoint number is en-
tered the buzzer sounds to alert you.)
7. Press the [+] key to set waypoint. The [-]
key can be used to cancel an entry.
8. Repeat steps 6 and 7 to complete.
9. Press the [ENTER/SELECT] key. Current
position is marked as "00" and a straight
line connects between it and all destina-
tion waypoints. This line shows the short-
est distance between waypoints.
10.Press the [MENU] key to finish.
6-1
Advertisement
Table of Contents
