Table of Contents
Advertisement
3 VIDEO PLOTTER
3.2.2
Choosing navigation data to display
Choose the navigation data to display on the video plotter display as follows:
1. Press the [NAV MENU] and [1] keys in to show the NAV INFORMATION 1
menu.
2. For items 2, 3, 5, 6 and 9, press the appropriate numeric key several times to
choose the setting desired, and then press the [ENTER] key.
Note1: Item 2 chooses the source of position data.
Note 2: When changing from GPS+LC to AIS or vice versa, the alarm
If you selected DEAD RECKONING, do the following to enter position.
a) Press the [4] key.
b) Enter current latitude position.
c) Press the [ENTER] key.
d) Press the [4] key to choose North or South.
e) Press the [ENTER] key.
f) Enter current longitude position.
16
[NAV INFORMATION 1]
1
[RADAR MAP]
2
SELECT NAVAID
GPS+LC/
DEAD RECKONING/AIS
3
OWN SHIP POSN
OFF/L/L
4
POSN
00
000
5
+ CURSOR DATA
OFF/L/L
6
WPT DATA
OFF/REL/TRUE
7
[WAY POINT]
8
[NAV LINE]
9
WIND DATA
OFF/ON
0
[NAV INFORMATION 2]
Nav information 1 menu
GPS+LC: Own ship position data fed from GPS or Loran C
navigator.
DEAD RECKONING: Position data entered at item 4 (POSN) is
used as starting point for dead reckoning.
AIS: Own ship position data fed from AIS transponder.
indication "EPFS" appears. Press the [CANCEL] key to erase the
alarm indication.
00.000 N/S
°
°
00.000 E/W
Advertisement
Table of Contents
