Navigation; Navigating To A Waypoint - Furuno RP-180 Operator's Manual

NAVIGATION

6.
This section covers navigation. You can navigate by waypoint, cursor-selected point and
route.
6.1 Navigation
6.1.1

Navigating to a waypoint

1. Press the [MENU] key.
2. Press the [1] key twice to show the Video Plot/AIS menu.
3. Press the [6] key twice to choose Destination Set.
4. Press the [3] key to choose Mode.
5. Press the [3] key again to choose WPT.
Destination
1.
2. Destination
Set
Cancel
3. Mode
Cursor
WPT
Route No.
MOB
Destination set menu
6-1