Memory Card Operations; The Memory Card Screen; How To Initialize Sd Cards - Furuno GP-1670 Operator's Manual

8.

MEMORY CARD OPERATIONS

This system uses SD and SDHC cards to store points, routes, tracks, settings, and
screenshots. The system accepts cards of up to 32GB in size.
8.1

The Memory Card Screen

Open the [GENERAL] menu and select [MEMORY CARD] to show the [MEMORY
CARD] screen. This is where all phases of memory card operations start.
Points&Routes
8.2

How to Initialize SD Cards

Before you can use an SD card, the card must be initialized for use with the system.
You can initialize cards that contain data, in which case all information on the card is
erased.
1. Open the SD card cover and insert a blank SD card in the SD card slot. Close the
cover.
2. Open the [GENERAL] menu and select [MEMORY CARD].
3. Push the ENT key to give control to the RotoKey functions (at the bottom of the
screen.) RotoKey
key. (If the card is not a storage card the message "It is not a user card." appears.)
When the initialization is completed, the message "SD Card was successfully ini-
tialized." appears. Do not remove the card until the initialization is completed.
4. Press the ESC/MENU key to erase the message.
Tracks
Name Points
FILE0001
TM
. Rotate the RotoKey
Screenshots
Routes Date
7 2 04-02-12
TM
to select [Initialize] then push the
Defaults
Time
01:20PM
8-1