Setting Up The Video Plotter; Hiding/Showing Graphics; Setting The Navigation Data - Furuno RP-25 Operator's Manual

2.3

Setting up the Video Plotter

2.3.1

Hiding/showing graphics

1. Press the [NAV MENU], [8] key in order to show DISPLAY SELECT menu.
The current settings are in reverse video (default setting: all item is ON.)
ON/OFF setting is described on chapter 3 "Initial settings".
2. Pres the numeric key of which the item you want to show (hide) twice to
select ON (OFF).
3. Press the [ENTER] key.
4. Repeat step 2 and 3 for other items.
5. Press the [NAV MENU] key to close the menu.
Note: TARGET PLOT is not available when your radar does not have ARPA
function.
2.3.2

Setting the navigation data

The navigation data displayed around the video plotter screen can be set as
follows.
1. Press the [NAV MENU], [1] key in order to show NAV INFORMATION 1
menu.
[DISPLAY SELECT]
1 [VIDEO PLOTTER 1]
2 SYMBOL
OFF/ON
3 COAST LINE
OFF/ON
4 LAND DENSITY
OFF/ON
5 PLACE NAME
OFF/ON
6 MARK
OFF/ON
7 OWN SHIP PLOT
OFF/ON
8 TARGET PLOT
OFF/ON
9 CONTOUR LINE
OFF/ON
0 GRID
OFF/ON
Display select menu
2. VIDEO PLOTTER
2-5