Menu Operation - Furuno GP-1670 Operator's Manual

1. OPERATIONAL OVERVIEW
1.12

Menu Operation

This section shows you how to operate the menu. There are seven menus, [General],
[Map], [Plotter], [Alarms], [System], [Instruments] and [Interface].
1. Long-push the ESC/MENU key to show the main menu.
2. Rotate the RotoKey
play that menu. (A menu can also be selected with the CursorPad.) For example,
select the [General] menu.
3. Rotate the RotoKey
show the corresponding options window. For example, select [Font
Size] and the options window shown right appears.
4. Use the RotoKey
some menu items it is necessary to enter numeric data or alphanumeric data.
How to enter alphanumeric data
1) Use the right and left arrows on the CursorPad to select the digit or character
to change.
2) Use the up and down arrows on the CursorPad to select a numeric value.
3) Repeat steps 1) and 2) to enter remaining numeric data.
1-20
TM
to select a menu then push the key or the ENT key to dis-
TM
to select a menu item then push the key to
TM
to select an option then push the key to confirm setting. On
Large
Small