7. ALARMS
7.6
Shear Alarm
The shear alarm, which requires water temperature data, sounds when the tempera-
ture exceeds the value set.
To set the shear alarm:
1. Open the [ALARMS] menu then select [SHEAR ALARM].
2. Confirm that the cursor is selecting the top line then push the RotoKey
3. Select [On].
4. Set the alarm value at [Distance].
5. Press the ESC/MENU key to close the menu.
7.7
Depth Alarm
The depth alarm, which requires depth data, sounds when the depth is within the
alarm range set.
To set the depth alarm:
1. Open the [ALARMS] menu then select [DEPTH ALARM].
2. Confirm that the cursor is selecting the top line then push the RotoKey
3. Select [On].
4. Select [Depth].
5. Enter the starting point.
6. Select [Range].
7. Set the alarm range.
8. Press the ESC/MENU key to close the menu.
7.8
Anchor Alarm
The anchor alarm informs you that your boat is moving when it should be at rest.
Alarm range
To set the anchor alarm:
1. Open the [ALARMS] menu then select [ANCHOR ALARM].
2. Confirm that the cursor is selecting the top line then push the RotoKey
3. Select [On].
4. Set the alarm value at [Distance].
5. Press the ESC/MENU key to close the menu.
7-4
Own ship position
: Alarm release area
TM
.
TM
.
TM
.