3.2.3
How to enter a position manually on the plotter screen
Press the ENT key to show the context-sensitive menu. Select [LAT/LON] then press
the ENT key to show the position input box. The position shown in the box is the cursor
position. Enter position using the CursorPad. After you have entered the position, the
[Save] button is automatically selected. Press the ENT key to save the point, under
the youngest empty point number.
3.2.4
How to enter a point on the Points List
Do the following to enter a point on the [Points List].
1. Open the [PLOTTER] menu and select [POINTS] to show the [Points List].
2. The [New] button (at the bottom of the screen) is selected; push the RotoKey
to show the point entry window.
3. Follow step 3 to 8 in section 3.2.2.
4. To save the point, select the [Save] button then push the ENT key.
3. POINTS
TM
3-3